Descrição

Road Stud

Auxiliary Traffic Signaling Devices.

The road stud can be reflective or not, serves as a signal or speed reducer, must be of high durability and withstand high compression loads. The device has two galvanized steel pins for fixation, and must be applied together with the glue for resin devices. It has the bidirectional name because it has reflective material on both sides of the piece. It has the function of channeling traffic or diverting the flow of vehicles from places where there is a risk of accidents, depending on the characteristics of each point of the road, especially at night or in circumstances where the driver has low visibility when driving.

Characteristics:

Form: Prismatic trunk;

Predominant material: Resin;

Color: Body Yellow, reflective yellow, red or white;

Dimension of the reflective element: 13.5 x 3.5 cm;

Reflective: Monodirectional (one reflective plate), Bidirectional (two reflective plates);

Approximate dimension: 16 x 25 x 5 cm;

Weight (average): 2,800 g;

Fixing pin: 0.9 x 5.0 cm;

Quantity of adhesive (glue) for fixing: 200 grams per piece.

Use:

Delimitation of overtaking sections not allowed on transit routes; Marking of special areas such as: roundabouts, bifurcations, clovers, cycle lanes; It can be used as a speed bump exclusively on private roads such as: condominiums, internal company parking lots, shopping mall parking lots and other particular cases.

Application time:

Minimum of 20 minutes for drying the adhesive (glue). Specification: NBR 15.576: 2013 – Road horizontal signage – Road reflective studs